Hot runner mold design and production needs injection molding machine into production, the choice of injection molding machine is also very important. All automatic injection molding machine cycle capacity, to apply to the hot runner system. In the choice of injection molding machine when the following factors need to be considered:
1) hot runner mold due to an increase of hot runner, more flow manifold plate, so a corresponding increase in the thickness of the mold, the injection molding machine should pay attention to the injection molding machine installation height.
2) injection molding machine injection volume measurement, to take into account the large volume of plastic flow in the compressibility.
3) For hot runner mold depreciation, to promote the continuous operation of the injection molding machine, with multi-level start to reduce spoiling.
Many devices used to ensure the automatic operation of the mold, the preferred robot or a simple and controllable manipulator, such as:
1) The product needs to be placed in the mold with inserts, labels or sheets.
2) Remove the plastic parts or speed them out.
3) control the movement of plastic parts and reduce the start-up time attachment.
4) Heating the mold before starting the injection molding machine.
5) reduce the time on the mold to reduce the cooling water pipes, gas, circuit and hot runner temperature control box connection time. 【Suzhou Mold Casting】