小米彩票开奖

Die Normalien für den Werkzeug- und Formenbau!
昆山亿晟力精密模具有限公司

Stamping die large set of terms

Categories of news

Contact us

Kunshan YSL Mould 

Add: No 258, Longsheng Road, Kunshan City, Jiangsu Province, China

Tel: 86 512-55198806

Mobile: 13405666986

Fax: 86 512-55198805

E-mail: [email protected]

[email protected]

Website: www.mc3721.com

Contact: Mr. Gong Guizhang


Stamping die large set of terms

Release date:2017-08-09 Author: Click:

Upper mold: The upper mold is the entire upper half of the die, which is mounted on the press part of the punch on the slider.
Upper die holder: The upper die holder is the uppermost plate-shaped part of the upper die. When the workpiece is in close contact with the press slide, it is fixed by the die holder or directly to the press slide.
Die: Die is the entire second half of the die, that is installed in the press work surface mold parts terms
Upper mold: The upper mold is the entire upper half of the die, which is mounted on the press part of the punch on the slider.
Upper die holder: The upper die holder is the uppermost plate-shaped part of the upper die. When the workpiece is in close contact with the press slide, it is fixed by the die holder or directly to the press slide.
The lower mold: the lower mold is the entire vice-die half, which is installed on the press worktable die part.
Lower die holder: The lower die holder is a plate-shaped part on the bottom surface of the lower die, which is directly fixed on the press workbench or the backing plate during work.
Edge wall: Edge wall is blanking die hole edge of the side wall.
Edge slope: edge slope is punching die hole edge of each side wall slope.
Air cushion: Air cushion is compressed air as the driving force of the projectile.
Anti-side pressure block: The anti-side pressure block is from the other side of the face to support one-way force punch parts.
Guide sleeve: The guide sleeve is for the upper and lower relative movement of the mold base to provide precision-oriented tubular parts, the majority of fixed in the mold base, with the fixed in the lower mold base with the use of guide posts.
Guide plate: The guide plate is a plate-shaped part with an inner hole for precision sliding contact with the punch. It is used to ensure that the punch and the die are aligned with each other and play the role of unloading.
Guide post: The guide post is for the upper and lower mold base relative movement to provide precision-oriented cylindrical parts, the majority of fixed in the lower mold base, and fixed in the upper mold base guide sleeve used in conjunction.
Piloted Pins: Piloted Pins are pin-shaped parts that extend into the material bore to guide them in the female mold.
Guide plate die: Guide plate die: Die is guided by the guide for the die, the punch does not die when using the guide plate.
Guide plate: guide plate is the guide strip (belt, roll) into the die plate-shaped guide parts.
Guide column mold frame: Guide column mold frame is a guide column, guide sleeve sliding mold frame.
Die: Die is installed in the press for the production of pieces of technology equipment, by the mutual cooperation of the two parts.
Punch: Punch is the punch directly from the punch forming the role of the convex parts, that is, the shape of the working surface of the parts.
Dies: Dies is the punch directly from the punch role in the formation of concave parts, that is, the shape of the working surface of the parts.
Fender: Fender is to prevent finger or foreign body into the die area of dangerous parts of the plate.
Platen (circle): Platen (circle) is the die used to suppress the stamping material or process parts to control the flow of materials parts, in the drawing die, the majority of the material known as the pressure plate blankets.
Compression tendons: embossing tendons are drawing die or drawing die to control the flow of materials tendons, embossing tendons or die can be pressed into the local structure, it can be set in the die or pressure Individual parts in the ring.
Pressure material sill: Pressure material sizing is a rectangular cross-section of concrete pressure bar.
Bearing plate: Bearing plate is used for the long concave die on the plane, supporting the stamping material plate parts.
Side edge: The side edge is in the strip (belt, roll) side cut material feed notch positioning punch.
Side Platen: The side platen is a strip (tape, roll) side of the material by the spring pressure, prompting the other side of the * tight plate material plate parts.
Lifter: Lifter is the upward action directly or indirectly overhead (sequence) or preface rod parts.
Ring gear: The ring gear is a serrated protrusion on a precision blanking die or a toothed blanking plate. It is a partial structure of a die or toothed blanking plate rather than a separate part.
Limit Sleeve: Limit Sleeve is used to limit the minimum closing height of the die of the tubular parts, generally set in the guide column outside.
Limit column: The limit column is a column that limits the minimum closing height of the die.
Positioning pin (plate): Positioning pin (plate) is to ensure that the workpiece parts in the mold has a constant position of the parts, with its different shape as the positioning pin or positioning plate.
Fixing plate: The fixing plate is a plate-shaped part that fixes the punch.
Fixed unloading plate: Fixed unloading plate is fixed in the die position on the unloading plate.
Fixed stopper (plate): Fixed stopper (plate) is fixed in the mold of the stopper block (plate).
Unloader: Unloader is a non-plate-shaped part or device that unloads the work piece from the outer surface of the punch. # p # Pagination # e #
Stripper: stripper is the material or work (sequence) from the punch off the fixed or moving plate-shaped parts. Stripper plate is sometimes made with the guide plate, together with the guide role, still said the stripper.
Discharge screw: The unloading screw is a screw fixed on the ejector plate to limit the rest position of the eject plate.
Scrap Cutter: There are two types of Scrap Cutter. 1. Cutter mounted on the flange of the die-cut trimming die to cut the entire ring of trim scrap for cleaning. 2. Cutter mounted on a press or die for cut-to-length cuttings for easy cleaning.
The beginning of the material used to block the pin (board): The beginning of the material used to block the pin (plate) is the starting material for the feeding of the positioning of the parts. Start with the expected material pin (board) are mobile.
Pieces: Pieces are composed of a complete die, punch, stripper or fixed plate, and other pieces of the various pieces.
Stopper (plate): Stopper (plate) is a hardened part for positioning when feeding through the notched material of the side edge, which is used to balance the single-sided cutting force suffered by the side edge. Stopper (plate) generally used in conjunction with the side of the blade.
Blocking pin (board): Blocking pin (board) is the positioning of the material along the feed direction of the parts, with its different shape and called the retaining pin or block. Blocking pin (plate) is a fixed block material (board), the activities of the material retaining pin (board), the beginning of the material used to block the pin (board) collectively.
Pad: Pad is between the fixed plate (or die) and mold base hardened plate-like parts, to reduce the mold base unit to withstand compressive stress.
Compound die: The compound die is a punch in the press during the trip, in the same station to complete two or more processes.
Retaining Rings: Retaining Rings are perforated tubular parts that hold and limit the ball (s) in the ball guide frame.
Activity stop pin (board): activity stop pin (board) is in the mold can move up and down or left and right activities of the material of the pin (board).
Belt pressure plate: Belt pressure plate is fine blanking plate in the special, due to pressure surface with a ring gear named.
Putter: Putter is a downward action directly or indirectly launched work (order) pieces or scrap bar parts.
Floating mold handle: Floating mold handle is the upper and lower mold base simultaneously up and down, but the center axis hole and the upper mold base plane angle can be within a certain range of freedom of movement of the mold handle.
Push plate: push plate is a movable die plate or module plate parts, to direct action directly or indirectly launched work order or waste.
Wedges: Wedges are wedges that change the direction of a straight line movement in a mold. Most wedges change the vertical movement into a horizontal movement.
Projectile top device: The top device is installed in the press table or under the die stamping aids, by the pressure, hydraulic, spring, rubber and so on, to the lower mold roof, ram and so on to provide upward pressure and promote its Move up.
Discharge plate: Discharge plate is by the spring, rubber, hydraulic, pneumatic and other activities of the discharge plate.
Carbide Die: Carbide die is a die-hard alloy as a part of the die material.
Leakage holes: Leakage holes and punching die is also directly through, for the exclusion of waste or work (sequence) pieces of the hole.
Leakage slope: Leakage slope is less than the edge of the die wall below each side of the hole. Leakage slope for scraps or work pieces to flow smoothly.
Ball-guide column mold: Ball-guide column mold is the guide column and guide sleeve respectively on the ball (child) rolling the mold, referred to as the ball mold.
Mold handle: Mold handle is a cylindrical part that protrudes from the top surface of the upper mold base. When working, it extends into the press slider hole and is clamped and fixed.
Mold frame: Mold frame is the upper and lower mold base and guide posts, guide sleeve assembly, with or without mold holder. Most molds are standard parts.
Mold Frame: The mold frame is the base that holds the mold block.
Top plate: The top plate is a plate-shaped part that moves inside a die or module to lift the work piece or waste directly or indirectly. 【Suzhou mold design

This article URL:http://www.mc3721.com/en/news/359.html

Related tags:Suzhouprecisionmoldmanufacturers

Recently Viewed:

Related Products:

Related news:

小米彩票开奖直播网 江苏快3走势图 小米彩票开户 幸运时时彩平台 北京pk10 500彩票网 500彩票网 500万彩票网 极速3D彩票 小米彩票登陆