Many of my friends in the use of metal stamping die does not focus on maintenance, in fact, this idea is not correct, why should we say that? We should pay attention to metal stamping mold maintenance, so as to better use of metal stamping die and extend the life of metal stamping die, based on a lot of friends do not know how to maintain, teach you how to maintain the following metal stamping die.
Metal stamping mold maintenance and repair methods:
1, metal stamping dies in the course of the punch break, twists and bite and so on, punch sets are usually gnawed, punch and punch damage is generally replaced with the same kind of standard parts.
2, metal stamping die pressing parts such as pressing board, gifted plastic, etc .; unloading parts such as stripboard, pneumatic jacking and so on. In the maintenance and repair to see if the parts of the spare parts for damage, if damaged to be corrected in time, pneumatic top to see if there is no leakage, and the detailed situation to adopt a solution. If the trachea is damaged it can be replaced.
3, metal stamping die spring and other elastic parts in the process of the most vulnerable to damage the spring, usually showing the phenomenon of cracking and deformation; maintenance and repair methods can be replaced, but in the replacement process must pay attention to the spring standard and type of spring The standard and type of color, diameter and length of the three major items, only in all three cases can be replaced.
The above is about the metal stamping mold maintenance and repair methods, in order to extend the use of metal stamping die, it is recommended that we use the mold of friends should pay attention to maintenance. 【Suzhou Mold Casting】